Dell PowerEdge FX2/FX2s - Manual (Page 56)

line
Enable and configure console and virtual terminal lines to the system. This command accesses LINE
mode, where you can set the access conditions for the designated line.
Syntax line {console 0 | vty number [end-number]}
Parameters
console 0 Enter the keyword console 0 to configure the console port.
The console option is <0-0>.
vty number Enter the keyword vty followed by a number from 0 to 9 to
configure a virtual terminal line for Telnet sessions.
The system supports 10 Telnet sessions.
end-number
(OPTIONAL) Enter a number from 1 to 9 as the last virtual
terminal line to configure.
You can configure multiple lines at one time.
Defaults Not configured
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information You cannot delete a terminal connection.
Related
Commands show memory — View current memory usage on the I/O Aggregator.
ping
Test connectivity between the system and another device by sending echo requests and waiting for
replies.
Syntax ping host
Parameters
host Enter the host name or the destination IP address of the
device to which you are testing connectivity.
Command
Modes
• EXEC
• EXEC Privilege
56