Dell PowerEdge FX2/FX2s - Manual (Page 32)

primary Enter the keyword primary to set the primary image path
for the system.
secondary Enter the keyword secondary to set the secondary image
path for the system.
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
The system first attempts to load the image from the primary path. If it fails to boot,
the system tries to load the image from the secondary path and if that also fails, the
system loads the default image.
cd
Change to a different working directory.
Syntax cd directory
Parameters
directory (OPTONAL) Enter one of the following:
• flash: (internal Flash) or any sub-directory
• usbflash: (external Flash) or any sub-directory
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
copy
Copy one file to another location. The Dell Networking OS supports IPv4 addressing for FTP, TFTP, and
SCP (in the hostip field).
Syntax copy source-file-url destination-file-url
Parameters
file-url Enter the following location keywords and information:
• To copy a file from the internal FLASH, enter flash://
then the filename.
• To copy the running configuration, enter the keywords
running-config.
32