Dell PowerEdge FX2/FX2s - Manual (Page 62)

Related
Commands debug cpu-traffic-stats — enables CPU traffic statistics for debugging.
show debugging
View a list of all enabled debugging processes.
Syntax show debugging
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show debug
Generic IP: (Access List: test)
IP packet debugging is on for (Access List: test)
TenGigabitEthernet 0/16
ICMP packet debugging is on for
TenGigabitEthernet 0/16
OSPF:1
OSPF packet debugging is on
DHCP:
DHCP debugging is on
Dell#
show diag
Display the diagnostics information.
Syntax show diag {information | stack-unit number [detail | summary]]
| testcase}
Parameters
information Enter the keyword information to view current diagnostics
information in the system.
stack-unit unit-
id (OPTIONAL) Enter the keywords stack-unit then the unit-
id to display information on a specific stack member. The
range is from 0 to 5.
detail (OPTIONAL) Enter the keyword detail to view detailed
diagnostics information.
summary (OPTIONAL) Enter the keyword summary to view a summary
of the diagnostics information.
testcase Enter the keyword testcase to view current diagnostics
testcases available in the system.
62