Dell PowerEdge FX2/FX2s - Manual (Page 331)

Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show file flash://startup-config
! Version 9-4(0-180)
boot system stack-unit 1 primary tftp://10.11.9.21/dv-m1000e-2-
b2
boot system stack-unit 1 default system: A:
boot system gateway 10.11.209.62
!
hostname FTOS
--More--
Dell#
Related
Commands
format flash — erases all the existing files and reformats the filesystem in the
internal flash memory.
show file-systems — displays information about the file systems on the system.
show file-systems
Displays information about the file systems on the system.
Syntax show file-systems
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
2143281152 836874240 FAT32 USERFLASH rw flash:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
Dell#
Command
Fields
Field Description
size(b) Lists the size in bytes of the storage location. If the location
is remote, no size is listed.
Free(b) Lists the available size in bytes of the storage location. If the
location is remote, no size is listed.
Feature Displays the formatted DOS version of the device.
Type Displays the type of storage. If the location is remote, the
word network is listed.
Flags Displays the access available to the storage location. The
following letters indicate the level of access:
• r = read access
331