Dell PowerEdge FX2/FX2s - Manual (Page 177)

Field Description
• CP = control processor
• Fo= 40 Gigabit Ethernet interface
• Te = 10 Gigabit Ethernet interface
Example
Dell#show ip multicast-cam stack-unit 0 port-set 0
10.10.10.10/32
longer-prefixes
Destination EC CG V C VId Mac-Addr Port
----------------- -- -- - - ----- -----------------
-------------
10.10.10.10 0 0 1 1 0 00:00:00:00:00:00
3f01 CP
Dell#
show ip route
View information, including how they were learned, about the IP routes on the switch.
Syntax show ip route [hostname | ip-address [mask] [longer-prefixes] |
list prefix-list [process-id] | connected | static | summary]
Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
mask (OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a
configured prefix list.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
static (OPTIONAL) Enter the keyword static to view only routes
configured by the ip route command.
summary (OPTIONAL) Enter the keyword summary.
Command
Modes
• EXEC
• EXEC Privilege
177