Dell PowerEdge FX2/FX2s - Manual (Page 311)

Field Description
Local Parameters ETS configuration on local port, including admin mode
(enabled when a valid TLV is received from a peer), priority
groups, assigned dot1p priorities, and bandwidth allocation.
Operational status
(local port) Port state for current operational ETS configuration:
• Init: Local ETS configuration parameters were
exchanged with the peer.
• Recommend: Remote ETS configuration parameters were
received from the peer.
• Internally propagated: ETS configuration
parameters were received from the configuration
source.
ETS DCBX Oper
status Operational status of the ETS configuration on the local
port: match or mismatch.
Reason Reason displayed when the DCBx operational status for ETS
on a port is down.
State Machine
Type Type of state machine used for DCBX exchanges of ETS
parameters: Feature — for legacy DCBX versions;
Asymmetric — for an IEEE version.
Conf TLV Tx
Status Status of ETS Configuration TLV advertisements: enabled or
disabled.
ETS TLV Statistic:
Input Conf TLV
pkts Number of ETS Configuration TLVs received.
ETS TLV Statistic:
Output Conf TLV
pkts Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic:
Error Conf TLV
pkts Number of ETS Error Configuration TLVs received.
Example
(Summary)
Dell(conf)# show interfaces te 0/1 ets summary
Interface TenGigabitEthernet 0/1
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters:
------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
0 0,1,2,3,4,5,6,7 100% ETS
1 0% ETS
2 0% ETS
3 0% ETS
4 0% ETS
5 0% ETS
6 0% ETS
311