Dell PowerEdge FX2/FX2s - Manual (Page 104)

Example
Dell#show int te 0/2 dcbx detail
E-ETS Configuration TLV enabled e-ETS
Configuration TLV disabled
R-ETS Recommendation TLV enabled r-ETS
Recommendation TLV disabled
P-PFC Configuration TLV enabled p-PFC
Configuration TLV disabled
F-Application priority for FCOE enabled f-Application
Priority for FCOE
disabled
I-Application priority for iSCSI enabled i-Application
Priority for iSCSI
disabled
---------------------------------------------------------------
----------------
-----------
Interface TenGigabitEthernet 0/2
Port Role is Auto-Upstream
DCBX Operational Status is Disabled
Reason: Port Shutdown
Is Configuration Source? FALSE
Local DCBX Compatibility mode is IEEEv2.5
Local DCBX Configured mode is IEEEv2.5
Peer Operating version is Not Detected
Local DCBX TLVs Transmitted: ErPfi
0 Input PFC TLV pkts, 0 Output PFC TLV pkts, 0 Error PFC pkts
0 PFC Pause Tx pkts, 0 Pause Rx pkts
0 Input ETS Conf TLV pkts, 0 Output ETS Conf TLV pkts, 0 Error
ETS Conf TLV
pkts
0 Input ETS Reco TLV pkts, 0 Output ETS Reco TLV pkts, 0 Error
ETS Reco TLV
pkts
0 Input Appln Priority TLV pkts, 0 Output Appln Priority TLV
pkts, 0 Error
Appln Priority TLV pkts
Total DCBx Frames transmitted 0
Total DCBx Frames received 0
Total DCBx Frames errors 0
Total DCBx Frames unrecognized 0
Dell#
show interface ets
Displays the ETS configuration applied to egress traffic on an interface, including priority groups with
priorities and bandwidth allocation.
Syntax show interface port-type slot/port ets {summary | detail}
Parameters
port-type slot/
port ets Enter the port-type slot and port ETS information.
{summary |
detail} Enter the keyword summary for a summary list of results or
enter the keyword detail for a full list of results.
104