Dell PowerEdge FX2/FX2s - Manual (Page 246)

snmp-server community
Configure a new community string access for SNMPv1 and v2.
Syntax snmp-server community community-name {ro}
To remove access to a community, use the no snmp-server community
community-string {ro | rw} command.
Parameters
community-
name Enter a text string (up to 20 characters long) to act as a
password for SNMP.
ro Enter the keyword ro to specify read-only permission.
Defaults none
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The following example configures a community named guest that is mapped to
the security named guestuser with Read Only (ro) permissions.
Example
Dell#config
Dell(conf)# snmp-server community guest ro
Related
Commands
show running-config — displays the current SNMP configuration and defaults.
terminal monitor
Configure the Dell Networking OS to display messages on the monitor/terminal.
Syntax terminal monitor
To return to default settings, use the terminal no monitor command.
defaults Disabled.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Related
Commands logging monitor — sets the logging parameters on the monitor/terminal.
246