Ftp-server username, Hostname – Dell PowerEdge FX2/FX2s User Manual
Page 54
Related
Commands
— enables FTP server functions on the I/O Aggregator.
— sets a username and password for incoming FTP
connections to the I/O Aggregator.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type]
password
Parameters
username
Enter a text string up to 40 characters long as the user name.
password
password
Enter the keyword password then a string up to 40
characters long as the password. Without specifying an
encryption type, the password is unencrypted.
encryption-
type
(OPTIONAL) After the keyword password, enter one of the
following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Defaults
Not enabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
hostname
Set the host name of the system.
Syntax
hostname name
Parameters
name
Enter a text string, up to 32 characters long.
Defaults
Dell
Command
Modes
CONFIGURATION
54