MTS Series 793 Application - Manual (Page 81)

MPT Options Editor Unit Selection Tab
MTS MultiPurpose TestWare® MPT Options Editor 81
You can type a process summary, identify the procedure, describe the test, or
write instructions to the test operator. This information appears in the Print
Preview window.
MPT Options Editor Unit Selection Tab
Use the Unit Selection tab on the MPT Options Editor to assign a different unit
assignment set to the current procedure.
Access From the MPT control panel or MPT Procedure Editor window, the access path
is:
> Unit Selection tab
Or, from the MPT Procedure Editor window, an alternate path is:
Tools > Options Editor > Unit Selection tab
Properties Tab
I TEM D ESCRIPTION
File Name Displays the name and path of the current procedure selection.
Description Type a description or other information about the procedure here.
Author Type the author’s name here.
Unit Selection Tab (part 1 of 2)
I TEM D ESCRIPTION
UAS Comment Displays a description of the selected unit assignment set.
Selection list Displays a list of the defined unit assignment sets. The currently selected set is
shown.