MTS Series 793 Application User Manual
Page 482
MTS MultiPurpose TestWare®
Profile Editor
Model 793.11 Profile Editor
482
Profiles are saved in the ASCII format.
You can also specify how you want the profile to be viewed and stored by
selecting preferences in the Options Editor window.
Channel grids
You create profiles by selecting properties or typing values for each cell in a
channel grid. When the profile is played out, this information is read in sequence
to produce a waveform.
The cells in each row of a channel grid can contain the following information:
•
Timing—Frequency, Time, and for block-arbitrary profiles, Rate
•
Count—Segments or Cycles
•
Shape—Square, Ramp, Sine, True Sine, Square Tapered, Ramp Tapered,
Sine Tapered, or True Sine Tapered
•
End levels—Level 1 and Level 2
•
Phase—phase lag between channel data (phase-type profiles)
•
Action—counters and user-defined actions
Profile properties
You can select properties for each channel grid in the profile in the Channel
Setup window. Your selections will be reflected in the name of the channel grid,
and in the labels of the columns in the channel grid.
The properties that can be selected are:
•
Name (channel name)
•
Timing (Frequency, Time, and for block-arbitrary profiles only, Rate)
•
Dimension
•
Level Units
•
Count Units (segments or cycles)