MTS Series 793 Application - Manual (Page 257)

Model 793.71/72 Time History Output Process
MTS MultiPurpose TestWare® Command Processes 257
Trend tab
Note This tab appears only if you have purchased the data acquisition option
of the Time History Output process (Model 793.72).
Status tab
Trend Tab
I TEM D ESCRIPTION
Support Trend
Response Files Enables MPT to acquire and store trend response data. This data can be used
by the RPC III application to show changes that occurred in the specimen over
the course of the test.
Passes Per Trend
Response Specifies the number of passes the drive file will play out before a trend
response file is stored.
Trend Response File
Name Root Specifies the root of trend response file names.
Trend response files are stored in the same folder as the response file defined
on the Acquisition tab. When the first response file is saved, it is named your
root name000.rsp. Subsequent response files are named your root
name001.rsp, your root name002.rsp, your root name003.rsp, and so on.
Status Tab
I TEM D ESCRIPTION
Show Status Panel at
Run Time Check this box to make a status panel appear in the MPT control panel when
this process runs. The status panel displays the progress of the process
execution. If you do not enable the Show Distance Traveled checkbox, the
status panel will display process progress in terms of Elapsed Time, Total
Time (target time), and Percent Completed.
Show Distance
Traveled/Vehicle
Speed Check this box to make the status panel display process progress in terms of
Distance, Total Distance (target distance), and Percent Completed.
Checking this box enables the Vehicle Speed control.
Vehicle Speed Lets you enter a velocity for the vehicle. The distance displayed on the status
panel is calculated from the process’ running time.