MTS Series 793 Application - Manual (Page 229)

Signal Based Command Process
MTS MultiPurpose TestWare® Command Processes 229
Signal Based Command (SBC) Process Parameter Descriptions
Note The SBC process does not support compensation.
A high-speed transition time can result in an unwanted spike (or bump) in
the command signal.
Unwanted command-signal spikes can damage the test specimen.
To avoid spikes in the command signal, use a transition time that smoothly
transitions the channel commands to the initial SBC command level.
Command tab
CAUTION
Command Tab
I TEM D ESCRIPTION
Lookup Table Path/File Click to display the Open Lookup Table window and select a user-defined text
file containing the lookup data.
Transition Time Specifies the time the process takes to transition the channel commands to the
initial level. If zero is specified, the transition profile will not be executed.
Duration Time Specifies the amount of time that the process remains active.
• Select the Duration Time check box and enter the amount of time that the
process remains active.
• Clear the Duration Time check box to set the duration time to “Indefinite.”