MTS Series 793 Application - Manual (Page 539)

Profile Editor Controls and Displays
MTS MultiPurpose TestWare® Model 793.11 Profile Editor 539
For more information For more information, see “Design Considerations” on page 495.
For more information see, “About Using Normalized Dimensions” on page 510.
Channel Constants Window
Access Edit > Constants...
Use the Channel Constants window to define parameters as constants. When you
select a parameter as a constant, you can assign a characteristic for that parameter
that will be constant for all the rows in the channel. When you designate a
constant, its associated column is removed from the channel grid. When you do
not select a parameter as a constant, you will have to define it in each row on the
channel grid.
• In most cases you should complete the Channel Setup window, to name the
channel and assign units to each profile property, before you complete the
Channel Constants window.
• Leave at least one property as a variable. The application will not permit
you to assign all properties as constants.
Channel Setup Window (part 4 of 4)
I TEM D ESCRIPTION
Row 0
Row 1
1
2 3
1
2 3 4
Segment Example