MTS Series 793 Application - Manual (Page 562)

MTS MultiPurpose TestWare®
Shortcut Command Line
MPT Shortcuts 562
Shortcut Command Line
Note The syntax of the shortcut command lines are critical. If you do not use a
supported shortcut command line, the shortcut will not work.
Parameter and prefix descriptions are listed as follows:
Command line
practices
When you are editing the command line, keep in mind:
• The order of the parameters is not important.
• Prefixes can be spelled out or abbreviated in the command line.
• The prefix and the parameter must be separated by a space.
• If the parameter name contains a space (for example, my first test.000), it
must be enclosed in quotation marks.
• The option names can be abbreviated to anything which is unique.
P ARAMETER P REFIX E XAMPLE
Load a Procedure file
/Procedure
*
, or /P
* If the parameter name contains spaces (for example, test 257.000), the name must be enclosed in
quotation marks (“test 257.000“).
/P default.000
Load a Specimen /Specimen * , or /Sp /Sp spec03
Launch MPT as an Editor (no
execution) /EditOnly
Launch the Procedure Editor
with MPT /Editor [x:y:w:h:style] mpt /editor
400:400:300:300:StyleMinimized
Connect to a Station /Station * , or /St /St station1.cfg
Connect to a System /System * , or /Sy /Sy 148.150.203.191
Controller Name /Controller name /Controller 001
Display the MPT command-line
options /Help, or /H