Tapered wave shapes, Square tapered, Ramp tapered – MTS Series 793 Application User Manual
Page 189: Sine tapered
Cyclic Command Process
MTS MultiPurpose TestWare®
Command Processes
189
Tapered wave shapes
You specify the beginning and ending taper times on the Command Options tab
in the Station Manager’s Channel Options window before you run the profile.
The Begin time formats the leading edge and the End time formats the trailing
edge.
Square tapered
This square wave tapers from 0% to 100% amplitude at the beginning of its
execution, and from 100% to 0% at the ending of its execution.
Ramp tapered
This ramp wave tapers from 0% to 100% amplitude at the beginning of its
execution, and from 100% to 0% at the ending of its execution.
Sine tapered
This sine wave tapers from 0% to 100% amplitude at the beginning of its
execution, and from 100% to 0% at the ending of its execution.
4.0000
2.0000
0.0000
2.0000
Time (sec)
4.0000
L1
L2
4.0000
2.0000
0.0000
2.0000
Time (sec)
4.0000
L1
L2
4.0000
2.0000
0.0000
2.0000
Time (sec)
4.0000
L1
L2