MTS Series 793 Application - Manual (Page 454)

MTS MultiPurpose TestWare®
Data Display Process
Other Process Descriptions 454
B. Select a Units type for the Level Increment.
C. Type the desired value for the Level Increment.
10. Click the Plot Setup tab.
11. Click the X-Axis tab.
12. Select the desired Signal.
13. Check the Show Values check box if you want the values to be displayed on
the plot.
14. Select the desired Zero Offset setting.
15. Select the desired Units.
16. Type the desired Initial Minimum and Initial Maximum values.
17. Click the Y1-Axis tab.
18. In the List Filter box, select the desired dimension category.
19. Double-click the individual signals you want to appear on the Y1-Axis.
20. For each signal included on the plot, define the Line Color and Line Style
controls as desired, and enable the Show Values control as desired.
21. Click the Y2-Axis tab.
22. In the List Filter box, select the desired dimension category.
23. Double-click the individual signals you want to appear on the Y2-Axis.
24. For each signal included on the plot, define the Line Color and Line Style
controls as desired, and enable the Show Values control as desired.
25. Click the Options tab.
26. Check the Show Grid box if you want the grid to appear on the plot.
27. Check the Show Legend box if you want the legend to appear on the plot.
28. Check the Transpose X/Y Axes if you want to exchange the position of the
axes.
29. Type the desired buffer size.
30. Select the desired Decimation Option.
31. Click the General tab.