MTS Series 793 Application - Manual (Page 333)

Time History Input Process
MTS MultiPurpose TestWare® Data Acquisition Process Descriptions 333
Channels tab
General tab
For more information See “About Buffers” on page 272.
See “About Station Signals” on page 276.
Channels Tab
I TEM D ESCRIPTION
Number of Channels Selects the number of channels on which data is acquired and formatted.
Output File Channel Switches between Output File Channels.
Station Signal Defines the station signal associated with the selected output file channel.
Channel Descriptor Specifies the Output File Channel descriptor used in the response file header.
Note The default name is the Station Signal name.
General Tab
I TEM D ESCRIPTION
Name Specifies the process name displayed on the Procedure or Group process
window.
Process Enabled Enables the process. (Clear this box to disable the process.)
Execute Process Specifies the number of times the process will be run.
Counter Type Enables a process counter.
Options are None, Transient, or Fixed. Transient counters are displayed only
when the process is active. Fixed counters are displayed throughout the test.
Counter Label Names the counter.
When you run the test, this name appears under Sequence Counters on the
MPT control panel.
Note If this box is blank, the process name is used as the counter label.