MTS Series 793 Application - Manual (Page 57)

About the MPT Specimen Log
MTS MultiPurpose TestWare® Performing Common Tasks 57
About the MPT Specimen Log
Use the MPT Specimen Log to display a record of test events in the Message
Logs window.
Access
From the MPT Procedure Editor window, the access paths are:
Display > Specimen Log
Or:
MPT control panel >
The MPT Specimen Log records selected station and test events as they occur.
Note The MPT Specimen Log is displayed on the Message Logs window,
which can also display Station Log information (by selecting Station
Log in the Log list).
Events that can be logged include file events, resource conflicts, hydraulic status
changes, station state changes, detector activity, hardware over temperature
conditions, and full-scale changes.
Counter data is saved to the MPT Specimen Log automatically and manually .
Auto-archive function The MPT application automatically saves your MPT Specimen Log when it
accumulates at least 1000 log entries. When log entries are saved to the log file,
they are cleared from the MPT Specimen Log display.
Specimen log file
naming
The default name for the current MPT Specimen Log file is specimen .log.