Creating profiles, How to start the profile editor, About working with the station configuration file – MTS Series 793 Application User Manual
Page 487: Creating profiles 487, How to start the profile editor 487
Creating Profiles
MTS MultiPurpose TestWare®
Model 793.11 Profile Editor
487
Creating Profiles
How to Start the Profile Editor
From the desktop
From the desktop: Start > Programs > MTS controller product name (for
example, “MTS FlexTest GT”) > Applications > Profile Editor
From MTS applications
•
On the Project Manager tool bar, click the Profile Editor icon, or from the
Applications menu, click Profile Editor.
•
From the Station Manager Applications menu, click Profile Editor.
•
From the Station Desktop Organizer Start Applications menu, click Profile
Editor.
About Working with the Station Configuration File
Although the Profile Editor is a stand-alone application, it is important that some
elements of the profile match equivalent elements in the station configuration.
For instance, when you use Profile Editor to assign dimensions (force,
displacement, and so forth) to end levels in a profile, they should map to the
control mode/feedback dimensions in the station configuration.
When attempting to play out a profile, MultiPurpose TestWare will be unable to
recognize control modes in the station configuration unless they have the same
dimensions as equivalent control modes in the profile.
If equivalent control modes in the station configuration and profile have different
dimensions, you will not be able to map profile channels to station channels.