MTS Series 793 Application - Manual (Page 335)

Time History Input Process
MTS MultiPurpose TestWare® Data Acquisition Process Descriptions 335
18. Select the Process Enabled check box. (If this box is cleared, the process
will not run.)
19. In the Execute Process box, type number of times you want the process to
run.
20. Optional—In the Counter Type list, click a counter type.
21. Optional—If you enabled a counter, type a Counter Label.
22. Set the desired Start and Interrupt signals for the process in the procedure
table.
For more information
See “Data Destination” on page 275.