IDEC High Performance Series - Manual (Page 68)

Chapter 2
50
External Device Setup Manual
1.4.3 MICROSmart Pentra (FC5A-D12K1E, FC5A-D12S1E)
Set the following items on Project Settings dialog box.
Item Setting
IP Address (MICRO/I) Set the IP address for MICRO/I.
(Set this item in Communication Interface tab.)
Subnet Mask Set the subnet mask for MICRO/I.
(Set this item in Communication Interface tab.)
Default Gateway Set the default gateway for MICRO/I.
(Set this item in Communication Interface tab.)
IP Address (FC5A) Set the IP address for FC5A.
(Set this item in Host I/F Network tab.)
Port Number (FC5A) Set the port number for FC5A.
(Set this item in Host I/F Network tab.)