1 modbus, 1 connection table, Modbus – IDEC High Performance Series User Manual
Page 616: Connection table, 1modbus, External device setup manual

Chapter 5
598
External Device Setup Manual
1
Modbus
Selecting Modbus RTU or Modbus TCP Client for the Host I/F Driver or Communication Driver allows the user to use the 1: N Com-
munication function.
•
1: N Communication function (Chapter 6 1: N Communication Function)
1.1
Connection Table
1.1.1
Compatible Protocols
Modbus TCP Client or Modbus TCP Server cannot be used as Host I/F driver by MICRO/I equipped with the Ethernet
interface.
Protocol
WindO/I-NV2, WindO/I-NV3 Settings
Interface
Flow Control
Host I/F driver
Communication driver
Modbus RTU Master
RS232C, RS422/485 2-wire, RS422/485 4-wire
Hardware, None
Modbus RTU
Modbus ASCII Master
RS232C, RS422/485 2-wire, RS422/485 4-wire
Hardware, None
Modbus ASCII
Modbus TCP Client
Ethernet
*1
*1. Refer to Chapter 5 "1.6 Modbus TCP Server" on page 618.
-
Modbus TCP Client
Modbus TCP Server
Ethernet
-
Modbus TCP Server