IDEC High Performance Series - Manual (Page 21)

3
2 Compatible PLC Units
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
PL
C L
ink
Communi
cation
External Device Setup Manual
2 Compatible PLC Units
In order to connect the MICRO/I or Touch to a PLC using PLC Link Communication, you must select a communication protocol that
is compatible with the PLC’s CPU unit and Link Unit using the WindO/I-NV2 or WindO/I-NV3 application. The PLCs and link units
that are compatible with the MICRO/I or Touch are listed in the following table.
2.1 IDEC
Series Name System
(CPU unit) Link Unit WindO/I-NV2,
WIndO/I-NV3
Setting Product Series
HG2G
-5F,
HG3G/
4G HG2G
-S/-5S HG1F/
2F/ 2S/
3F/ 4F Touch
Host I/F Driver
Communication
Driver
OpenNet
Controller FC3A-CP2 Not required
(connects to CPU unit) OpenNet(FC3A),
MicroSmart
(FC4A/FC5A) X X X ---
FC4A-SX5ES1E Web Server Unit
(FC3A/FC4A/FC5A)
MICROSmart FC4A-C10R2 Not required
(connects to CPU unit) OpenNet(FC3A),
MicroSmart
(FC4A/FC5A)
FC4A-SX5ES1E Web Server Unit
(FC3A/FC4A/FC5A)
FC4A-C16R2,
FC4AC24R2 Not required
(connects to CPU unit) OpenNet(FC3A),
MicroSmart
(FC4A/FC5A)
FC4A-PC1
FC4A-PC3
FC4A-SX5ES1E Web Server Unit
(FC3A/FC4A/FC5A)
FC4A-D20K3,
FC4A-D20S3,
FC4A-D20RK1,
FC4A-D20RS1,
FC4A-D40K3,
FC4A-D40S3 Not required
(connects to CPU unit) OpenNet(FC3A),
MicroSmart
(FC4A/FC5A)
FC4A-HPC1
FC4A-HPC3
FC4A-HPH1
+FC4A-PC1
FC4A-HPH1
+FC4A-PC3
FC4A-SX5ES1E Web Server Unit
(FC3A/FC4A/FC5A)