External device setup manual – IDEC High Performance Series User Manual
Page 186
Chapter 2
168
External Device Setup Manual
4.2.7
Control Logix/CompactLogix/FlexLogix (CPU Unit)
4.2.8
Ethernet/IP (Native Tag) ControlLogix/CompactLogix/ (CPU Unit)
MICRO/I
RS232C
Connection Diagram 7
ControlLogix
CompactLogix
FlexLogix
MICRO/I
Ethernet
ControlLogix
CompactLogix
- Use a crossover cable to connect the MICRO/I and PLC directly.
- When using a hub (Ethernet switch), use a cable that can be used with the hub.
This manual is related to the following products: