External device setup manual – IDEC High Performance Series User Manual
Page 54
Chapter 2
36
External Device Setup Manual
1.2.9
1: N Communication-OpenNet Controller/MICROSmart/MICROSmart Pentra
(uses Web Server Unit)
The 1: N communication can be established by using the following connections
•
OpenNet Controller(uses Web Server Unit)
•
MICROSmart/MICROSmart Pentra (uses Web Server Unit)
•
MICROSmart Pentra FC5A-D12K1E, FC5A-D12S1E (Do not uses Web Server Unit)
MICRO/I
Ethernet
...
...
PLC1
PLC2
PLC3
PLCn
- Use a crossover cable to connect the MICRO/I and PLC directly.
- When using a hub (Ethernet switch), use a cable that can be used with the hub.
This manual is related to the following products: