IDEC High Performance Series - Manual (Page 630)

Chapter 5
612
External Device Setup Manual
In case of HG2F/3F/4F a connection cable is available. (part number: HG9Z-3C115).
There is no pin number corresponding to TERM on the HG2S. When inserting a termination resistor, use a communication
switch. For the setting of the switch, refer to Chapter 1 "3 Important Points Regarding Wiring" on page 19.
Mini Din 8P D-sub, 25P connector socket type
D-sub, 9P connector plug type D-sub, 37P connector plug type