2 system configuration, 1 dm link 1:1 communication, 2 dm link 1:n communication – IDEC High Performance Series User Manual
Page 579: System configuration, Dm link 1:1 communication, Dm link 1:n communication, 2system configuration
561
2 System Configuration
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
DM L
ink
Communica
ti
on
External Device Setup Manual
2
System Configuration
The system configuration for the DM Link communication is shown below.
2.1
DM Link 1:1 Communication
2.2
DM Link 1:N Communication
- When using an RS232C connection with DM Link 1:N communication, only one MICRO/I or Touch unit can be con-
nected.
- When constructing a system using RS422/485, design the circuit so that when the external device receiver input is not
connected, the receiver output is in the mark state.
This manual is related to the following products: