IDEC High Performance Series - Manual (Page 182)

Chapter 2
164
External Device Setup Manual
Series Name System (CPU unit) Link unit WindO/I-NV2 Settings MICRO/I Type
Interface Host I/F
Driver HG2G-S/-
5S/-5F,
HG3G/4G HG1F/
2F/ 2S/
3F/ 4F
ControlLogix ControlLogix5550,
ControlLogix5555
*1
*1. We tested with the PLC of these parts.
1756-ENBT Ethernet Ethernet/IP X X
CompactLogix
1769 CompactLogix
*1 Not required
(connects to CPU unit)
PLC-5
PLC-5
*1
1785-ENET
*1
PLC-5E Not required
(connects to CPU unit)
SLC 500
SLC5/05
*1
Not required
*1
(connects to CPU unit)
SLC5/03, SLC5/04,
SLC5/05
*1
1761-NET-ENI
*1
MicroLogix MicroLogix1000,
MicroLogix1100 *1 ,
MicroLogix1200
*1
,
MicroLogix1500
*1
1761-NET-ENI
*1
MicroLogix1100
*1 Not required
(connects to Built-in
Ethernet port on CPU
unit)
*1*2
*2. To connect the Ethernet port on MicroLogix1100, check the firmware version. MICRO/I supports version 4 or later. (The latest firmware is on
the Allen-Bradley web site.)
ControlLogix ControlLogix5550,
ControlLogix5555
*1
1756-ENBT Ethernet Ethernet/IP
(Native Tag) X *3
*3. The HG2G-S/-5S does not support Ethernet/IP(Native Tag) Driver.
---
CompactLogix
1769 CompactLogix
*1 Not required
(connects to CPU unit)