IDEC High Performance Series - Manual (Page 356)

Chapter 2
338
External Device Setup Manual
11.4.3 VersaMax Micro/Nano
Item Setting
Interface Set to the same setting
as the MICRO/I RS232C (Port 1), RS485 4-wire (Port 2)
Baud Rate [bps] 1200, 2400, 4800, 9600 or 19200
Data Bits 8 (fixed)
Parity Odd , Even or None
Stop Bits 1 or 2
Port Mode SNP
Port Type Slave
- Do not set SNP ID for the PLC. If you set it, MICRO/I will not communicate with PLC.
- Refer to the manuals of Series90-30 or VersaMax Micro/Nano PLCs for details.