External device setup manual – IDEC High Performance Series User Manual
Page 659

641
4 1:N Communication Operation
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1:N
Co
mmu
n
ication
External Device Setup Manual
Options when using “Ignore communication errors and continue operation"
When "Ignore communication errors and continue operation" is enabled, several options become available. This section
describes what these optional settings do.
Settings
Action when MICRO/I or Touch fails to connect to the external device
Display error message
Enable
An error message is displayed, but operation continues(Host communication error or
communication error ). The error message does not automatically close even if the
connection with the external device recovers. To close the error message, press the
Ack (acknowledge) button that is displayed on the error message itself.
Disable
No error message is displayed (Host communication error or communication error ),
and operation continues.
Auto retry
Enable
MICRO/I or Touch automatically tries to reconnect if a communication error occurs.
Disable
MICRO/I or Touch does not try to reconnect if a communication error occurs.In this
case, the bit 1 (connection settings) of the device set in "Individually monitor error
information for each Station No." automatically turns to 0.