IDEC High Performance Series - Manual (Page 55)

37
1 IDEC
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Con
nection
to a PLC
External Device Setup Manual
1.3 Connection Diagram
The connector types given in the Connection Diagrams are for the unit and not the cable. For details regarding wiring, refer
to Chapter 1 "3 Important Points Regarding Wiring" on page 19.
1.3.1 Connection Diagram 1: OpenNet Controller (RS232C port) to MICROI
MICROSmart Pentra (RS232C port) to MICRO/I
Mini Din 8P D-sub, 9P connector plug type
- In case of HG2G-5F, HG3G/4G a connection cable is available. (part number: HG9Z-XC295).
- The Connection Diagram 1 is not same as HG9Z-XC295. But both diagrams are available. Refer to Chapter 7 "1.20 PLC
connection cable: HG9Z-XC295" on page 656 about the connection diagram of HG9Z-XC295.