WattMaster WM-WCC3-TGD-01B - Manual (Page 89)

2. INITIATING THE SYSTEM
WCC III Technical Guide 2-21
Using the MCD-Menu Program
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
ProportionalReset.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
ShedRestoreSchedule.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
StatusMessage.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
SystemParameter.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/table.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
TenantEvent_001_2009_09.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
TenantEvent_004_2009_10.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
TenantOverride.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
TenantOverrideRecord.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
UnitMessage.dat
Copying fi le: /home/wcciii/.wine/drive_c/Backtask/
WeekSchedule.dat
Done copying .dat fi les.
Returning to Main Menu.
The screen should now take you back to the mcd-menu main
screen after about a second or two.
Restore BackTask data Files to USB Drive (Choice
#3)
This sub program will copy all of the useful WCC III data fi les
from a USB drive (User/Contractor provided), assuming that
there is a USB drive plugged into the USB port on the WCC
III – MCD. It will copy all of these fi les to the //home/wcciii/.
wine/drive_c/Backtask/ subdirectory of the WCC III – MCD
solid state hard drive.
If there is not a USB hard drive in the USB port on the front of
the WCCIII – MCD, this program assumes that there is a USB
drive there even if it is not there. It will not report that there is
a drive reading or writing error or any other errors. So when
backing up, make sure that there is a USB hard drive in the USB
socket port on the front of the WCCIII – MCD, and also there
should be a LED on this USB hard drive that should light up
when data is written or read from it. Please verify that this LED
operates when restoring data from this USB hard drive.
All WCC III jobsites have multiple specifi c custom data fi les
that are the responsibility of the end user and or mechanical
contractor. Any loss or the retention of these jobsite specifi c
custom data fi les are not with in WattMaster Controls Inc.
liabilities.
The following will be displayed on the screen:
Selecting Restore BackTask Files from USB Drive.
Copying fi le: /home/wcciii/.wine/dosdevices/d:/AlarmBits.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
AlarmMessage.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
DutyCycleSchedule.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
EnergyConsumption.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
GeneralMessage.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/GlobalAnalog.
dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/GlobalBinary.
dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
HolidaySchedule.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/LookUpTable.
dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
NetworkInformation.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/OperatorCode.
dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
OptimalSchedule.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
OverrideSchedule.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/PidProgram.
dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
ProportionalReset.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
ShedRestoreSchedule.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
StatusMessage.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
SystemParameter.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/table.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
TenantEvent_001_2009_09.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
TenantEvent_004_2009_10.dat
Copying fi le: /home/wcciii/.wine/dosdevices/d:/
TenantOverride.dat