I. introduction, Part numbers - cables and wire – WattMaster WM-WCC3-TGD-01B User Manual
Page 51
I. INTRODUCTION
WCC III Technical Guide
I-29
HSS Cables
Five conductor cable with shield. This cable also has 6 position female Mini-Fit connectors at both ends. Do not cut or splice this cable.
Connects between the SAT III HSS port and the WCC III Binary Input with Time Delay Boards (OE431-01) or the WCC III V-OUT
RELAY BOARDS (OE430-01). When ordering the WCC III V-OUT RELAY BOARD or WCC III BINARY INPUT WITH Time Delay
BOARD you must specify what length of HSS cable is necessary.
Wire Description WM “OE” PART NUMBER
Power only - 12 inch long cable.
Has connector on only one end
PC-01
12 inch long cable.
PCC-01
18 inch long cable.
PCC-1.5
3 foot long cable.
PCC-03
25 foot long cable.
PCC-25
40 foot long cable
PCC-40
80 foot long cable.
PCC-80
120 foot long cable.
PCC-120
Modular Cables
This modular cable has 8 position phone jack connectors at both ends. Do not cut or splice this cable. Connects between the VAV/Zone
Controller Actuator Package(VAVZ II) and a modular room sensor, a modular CO2 sensor, or a digital room sensor.
Wire Description
WM PART NUMBER
RJ-45 Cable for Flushmount Room Sensor Wiring, 5 ft.
FMRSC-05
RJ-45 Cable for Flushmount Room Sensor Wiring, 25 ft.
FMRSC-25
RJ-45 Cable for Flushmount Room Sensor Wiring, 40 ft.
FMRSC-40
RJ-45 Cable for Digital Room Sensor Wiring, 1 ft.
TSDRSC-01
RJ-45 Cable for Digital Room Sensor Wiring, 5 ft.
TSDRSC-05
RJ-45 Cable for Digital Room Sensor Wiring, 10 ft.
TSDRSC-10
RJ-45 Cable for Digital Room Sensor Wiring, 25 ft.
TSDRSC-25
RJ-45 Cable for Digital Room Sensor Wiring, 40 ft.
TSDRSC-40
RJ-45 Cable for Digital Room Sensor Wiring, 80 ft.
TSDRSC-80
RJ-45 Cable for Digital Room Sensor Wiring, 120 ft.
TSDRSC-120
Part Numbers - Cables and Wire