WattMaster WM-WCC3-TGD-01B - Manual (Page 191)

WCC III Technical Guide 3-77
WCC3.EXE SCREEN DESCRIPTIONS
The Logic Switch Screen looks the same as the Logic Switch
Summary Screen except for the location of the “LOGIC SWITCH”
and “Satellite #” labels at the top of the page. You must access the
Logic Switch Screen to input or edit data.
Satellite # _____
Specifi es the number of the satellite you are currently editing.
If you would like to edit a different satellite, simply position the
cursor to this fi eld by using the cursor positioning (arrow) keys,
enter the desired satellite number, and press
.
Logic Switch
Specifi es the summary type to be displayed. Because this is a
“choice” fi eld, a list of available choices will be displayed at the
bottom of the screen:
TREND LOGGING, LOGIC SWITCH, BINARY OUTPUT>
Make your selection by pressing the once for each
choice until the desired point type has been selected, and then
press
. (If you select a point type that is different than
that currently being displayed, the screen will be rewritten with the
appropriate screen and data.)
Satellite #1 LOGIC SWITCH
Description: On Message: Off Message: Current Confi g Time Delay
L1: S1-L1 1 On 2 Off OFF On Board 0
L2: S1-L2 1 On 2 Off OFF On Board 0
L3: S1-L3 1 On 2 Off OFF On Board 0
L4: S1-L4 1 On 2 Off OFF On Board 0
L5: S1-L5 1 On 2 Off OFF On Board 0
L6: S1-L6 1 On 2 Off OFF On Board 0
L7: S1-L7 1 On 2 Off OFF On Board 0
L8: S1-L8 1 On 2 Off OFF On Board 0
L9: S1-L9 1 On 2 Off OFF On Board 0
L10: S1-L10 1 On 2 Off OFF On Board 0
L11: S1-L11 1 On 2 Off OFF On Board 0
L12: S1-L12 1 On 2 Off OFF On Board 0
L13: S1-L13 1 On 2 Off OFF On Board 0
L14: S1-L14 1 On 2 Off OFF On Board 0
L15: S1-L15 1 On 2 Off OFF On Board 0
L16: S1-L16 1 On 2 Off OFF On Board 0
HOME for menu
LOGIC SWITCH SCREEN
Description
Specifi es a short textual message which is displayed on Summary
and Data Entry/Editing Screens to aid you in remembering
points within the system. You may enter up to twelve characters
(control codes, ALT codes, and the double quote character are not
allowed).
On Message Off Message
Specifi es a pair of message numbers, one for the switch open state
and the other for the switch closed state. These numbers are used
by the system to reference a textual message which is entered in
the Alarm Message Screen and then displayed in association with
this switch input.
Current
The current value of the logic switch will be displayed in this
location. The value will either be ON or OFF.
Logic Switch Screen’s WCC III Logical Address is XXXLYY, where XXX = Satellite Address #,
L = Logical Switch, YY = Logic Switch #
Logic Switch Screen