WattMaster WM-WCC3-TGD-01B - Manual (Page 557)

12. WCC III INSTALLATION
GUIDE
WCC III Technical Guide 12-61
How to Address TUC-2R and TUC-5R
when connecting them to a Sat 3D
Each SAT 3d physically takes up 4 plain Sat III addresses. You can
not set the SAT 3d address to an address less than #4.
TUC Addressing when Connected to a
SAT 3D
TUC address #1 is equal to the fi rst SAT 3d address, and
analog input #1 is the Space Temperature on TUC #1
TUC address #2 is equal to the fi rst SAT 3d address, and
analog input #2 is the Space Temperature on TUC #2
TUC address #3 is equal to the fi rst SAT 3d address, and
analog input #3 is the Space Temperature on TUC #3
TUC address #4 is equal to the fi rst SAT 3d address, and
analog input #4 is the Space Temperature on TUC #4
TUC address #5 is equal to the fi rst SAT 3d address, and
analog input #5 is the Space Temperature on TUC #5
TUC address #6 is equal to the fi rst SAT 3d address, and
analog input #6 is the Space Temperature on TUC #6
TUC address #7 is equal to the fi rst SAT 3d address, and
analog input #7 is the Space Temperature on TUC #7
TUC address #8 is equal to the fi rst SAT 3d address, and
analog input #8 is the Space Temperature on TUC #8
TUC address #9 is equal to the second SAT 3d address, and
analog input #1 is the Space Temperature on TUC #9
TUC address #10 is equal to the second SAT 3d address, and
analog input #2 is the Space Temperature on TUC #10
TUC address #11 is equal to the second SAT 3d address, and
analog input #3 is the Space Temperature on TUC #11
TUC address #12 is equal to the second SAT 3d address, and
analog input #4 is the Space Temperature on TUC #12
TUC address #13 is equal to the second SAT 3d address, and
analog input #5 is the Space Temperature on TUC #13
TUC address #14 is equal to the second SAT 3d address, and
analog input #6 is the Space Temperature on TUC #14
TUC address #15 is equal to the second SAT 3d address, and
analog input #7 is the Space Temperature on TUC #15
TUC address #16 is equal to the second SAT 3d address, and
analog input #8 is the Space Temperature on TUC #16
TUC address #17 is equal to the third SAT 3d address, and
analog input #1 is the Space Temperature on TUC #17
TUC address #18 is equal to the third SAT 3d address, and
analog input #2 is the Space Temperature on TUC #18
TUC address #19 is equal to the third SAT 3d address, and
analog input #3 is the Space Temperature on TUC #19
TUC address #20 is equal to the third SAT 3d address, and
analog input #4 is the Space Temperature on TUC #20
TUC address #21 is equal to the third SAT 3d address, and
analog input #5 is the Space Temperature on TUC #21
TUC address #22 is equal to the third SAT 3d address, and
analog input #6 is the Space Temperature on TUC #22
TUC address #23 is equal to the third SAT 3d address, and
analog input #7 is the Space Temperature on TUC #23
TUC address #24 is equal to the third SAT 3d address, and
analog input #8 is the Space Temperature on TUC #24
TUC address #25 is equal to the fourth SAT 3d address, and
analog input #1 is the Space Temperature on TUC #25
TUC address #26 is equal to the fourth SAT 3d address, and
analog input #2 is the Space Temperature on TUC #26
TUC address #27 is equal to the fourth SAT 3d address, and
analog input #3 is the Space Temperature on TUC #27
TUC address #28 is equal to the fourth SAT 3d address, and
analog input #4 is the Space Temperature on TUC #28
TUC address #29 is equal to the fourth SAT 3d address, and
analog input #5 is the Space Temperature on TUC #29
TUC address #30 is equal to the fourth SAT 3d address, and
analog input #6 is the Space Temperature on TUC #30
TUC address #31 is equal to the fourth SAT 3d address, and
analog input #7 is the Space Temperature on TUC #31
TUC address #32 is equal to the fourth SAT 3d address, and
analog input #8 is the Space Temperature on TUC #32
TUC Address #32 should not be used, but is listed as reference
only.
TUC Controllers to SAT 3D Addressing