WattMaster WM-WCC3-TGD-01B - Manual (Page 190)

WCC3.EXE SCREEN DESCRIPTIONS
WCC III Technical Guide 3-76
Logic Switch
Specifi es the summary type to be displayed. Because this is a
“choice” fi eld, a list of available choices will be displayed at the
bottom of the screen:
Trend Logging, Logic Switch, Binary Output>
Make your selection by pressing the once for each
choice until the desired point type has been selected, and then
press
. (If you select a point type that is different than that
currently being displayed, the screen will be rewritten with the
appropriate screen and data.)
Satellite #: ____
Specifi es the number of the satellite you are currently editing.
If you would like to edit a different satellite, simply position the
cursor to this fi eld by using the cursor positioning (arrow) keys,
enter the desired satellite number, and press
.
Time / Date
The present time and date will automatically appear in the upper
right corner of the screen.
Logic Switch
__1 Sat. #1
10:14 1/20
Description: On Message #: Off Message #: Current Confi g Time Delay
L1: S1-L1 1 On 2 OFF OFF On Board 0
L2: S1-L2 1 On 2 OFF OFF On Board 0
L3: S1-L3 1 On 2 OFF OFF On Board 0
L4: S1-L4 1 On 2 OFF OFF On Board 0
L5: S1-L5 1 On 2 OFF OFF On Board 0
L6: S1-L6 1 On 2 OFF OFF On Board 0
L7: S1-L7 1 On 2 OFF OFF On Board 0
L8: S1-L8 1 On 2 OFF OFF On Board 0
L9: S1-L9 1 On 2 OFF OFF On Board 0
L10: S1-L10 1 On 2 OFF OFF On Board 0
L11: S1-L11 1 On 2 OFF OFF On Board 0
L12: S1-L12 1 On 2 OFF OFF On Board 0
L13: S1-L13 1 On 2 OFF OFF On Board 0
L14: S1-L14 1 On 2 OFF OFF On Board 0
L15: Sl-L15 1 On 2 OFF OFF On Board 0
L16: S1-L16 1 On 2 OFF OFF On Board 0
LOGIC SWITCH SUMMARY SCREEN
Description
This location displays the descriptive message of the address. The
information comes from the description area of the logic switch
screen.
On Message
The ON message for the logic switch is displayed here.
Off Message
The OFF message for the logic switch is displayed here.
Current Confi g
The current confi guration of the logic switch will be displayed in
this location. The value will either be ON [On Board], ON [Off
Board], OFF [On Board], or OFF [Off Board].
Time Delay
The Time Delay value will be displayed in this location.
To input data or to edit data on this screen, you need to access
the Logic Switch Screen by positioning the cursor (shown as “>”
along the left hand side of the screen) using the cursor positioning
(arrow) keys to the desired point, and press
. The Logic
Switch Screen will now appear.
Logic Switch Screen’s WCC III Logical Address is XXXLYY, where XXX = Satellite Address #,
L = Logical Switch, YY = Logic Switch #
Logic Switch Summary Screen