Initiating the system, Adding a flash hard drive card – WattMaster WM-WCC3-TGD-01B User Manual
Page 109
2. INITIATING THE SYSTEM
WCC III Technical Guide
2-41
Step 4d:
Next, right mouse click on the TRANSCEND drive
under the “Volume label” (or other manufacturer of the Compact
Flash hard drive). A pull down type menu will appear. Right
click on “Change Drive Letter and Paths…”
Step 4e:
Select and highlight the current Compact Flash hard
drive, and then click the Change button.
(Right Mouse Click selects it)
Step 4f:
Using the drive letter selection button, select the
drive letter “E” , and only “E”.
Then select the “OK” button to exit this program, and keep
selecting the “OK” or “APPLY” buttons until you are back at
the main desktop menu again. Using the “My Computer” icon
please confi rm that the Compact Flash drive assignment is
now set at drive letter “E”, and “E” only.
Adding A Flash Hard Drive Card