Lenze 8200 motec frequency inverter 0.25kW-7.5kW - Manual (Page 8)

Preface and general information
1−1
L
EDB82MV752 EN 5.2
1 Preface and general information
1.1 The 8200 motec frequency inverter
Decentralised drive solutions require a flexible combination of motor/geared motor and frequency
inverter.
The concept of the 8200 motec frequency inverter is therefore based on a modular system of
matching components. Together with a Lenze geared motor or a Lenze three−phase AC motor the
8200 motec is a highly functional electronic variable speed drive.
As compact drives they can be used for adjusting speeds in different application, such as material
handling, HVAC technology, automation, etc. A free combination of input and output signals and
parallel operation of two interfaces ensure an individual solution for your drive task.
The 8200 motec frequency inverter is directly mounted onto the motor. Wall mounting of the
8200 motec is also possible.
1.2 About these Operating Instructions ...
·
These Operating Instructions are intended for all persons who install, set−up and adjust the
8200 motec frequency inverter.
·
A chapter informs entirely about a subject:
– You therefore only have to read the chapters you are interested in at the moment.
– The Index helps you to find all information about a certain topic.
·
These Instructions are meant as addition to the Mounting Instructions which are part of the
delivery package:
– The features and funtions are described in detail.
– Examples describe how to set the parameters for typical applications.
– In case of doubt, the Mounting Instructions delivered together with the 8200 motec
frequency inverter apply.
·
The Mounting Instructions do not inform about the use together with Lenze geared motors
and Lenze motors. The most important data are listed on the nameplates. If necessary,
Operating Instructions can always be ordered from Lenze.
1.3 Terminology used
Term In the following text used for
Controller Any frequency inverter, servo inverter or DC controller
motec Frequency inverter 8200 motec
Drive 8200 motec in combination with a geared motor, a three−phase AC motor and other Lenze drive components
AIF AutomationInterF ace: Interface for a communication module. Accessible from the outside at the heatsink of the motec.
FIF F unctionInterF ace: Interface for a function module. Is inside the motec.
Cxxxx/y Subcode y of code Cxxxx (e.g. C0517/3 = subcode 3 of code C0517)
Xk/y Terminal y on terminal strip Xk (e. g. X3/28 = terminal 28 on terminal strip X3)