Lenze 8200 motec frequency inverter 0.25kW-7.5kW - Manual (Page 70)

Parameter setting
With communication module LECOM−A (RS232)
6−15
L
EDB82MV752 EN 5.2
Code Important Parameter
No. Settings/options LECOM
format Designation
C1962 Extended error
no.
0 No error
1 Invalid service identification Internal error
2 Invalid call identification
3 Invalid data type User error in the host
4 Invalid subcode number
5 Invalid code number
6 Invalid parameter − general
7 Operating status, e. g. controller inhibit Access error
8 Operating mode C0001 wrong
9 Parameter can only be read
10 General
11 Data block length too long Limit violation
12 Collision with other parameter values
13 Leave value range
14 General limit violation
17 General internal error Internal error
32 General Communication error − communication module « controller
33 Time−out
34 Frame error
35 Parity error
36 Overflow
37 Handshake
38 Block memory overflow
208 Frame error Communication error − controller « communication module
209 Overflow error
210 Checksum error in the communication
module
211 Telegram interruption
212 Invalid data
213 Invalid service
214 Parity error