Lenze 8200 motec frequency inverter 0.25kW-7.5kW - Manual (Page 234)

Appendix
Code table
14−33
L
EDB82MV752 EN 5.2
Code IMPORTANT Possible settings
No. Selection Lenze Name
C0358*
v
Reset node 0 0 Without function
·
Only for the E82ZAFCC system bus
function module on the FIF interface.
·
System bus reset node set−up
1 System bus reset
C0359*
v
System bus status 0 Operational
·
Only for the E82ZAFCC system bus
function module on the FIF interface.
·
Only display
1 Pre−operational
2 Warning
3 Bus off
C0360*
v
Control of process
data channel CAN1 1 0 Event or time control Only for the E82ZAFCC system bus function
module on the FIF interface.
1 Sync control
C0370*
v
Activate remote
parameter setting
via system bus
(CAN) 0 Deactivated
·
Only for the E82ZAFCC system bus
function module on the FIF interface.
·
Can only be read when using all other
bus function modules on FIF.
1 ... 63 Activates corresponding CAN address 1 = CAN address 1
63 = CAN address 63
255 No system bus (CAN) Only display
C0372* Function module
identification 0 No function module Only display
1 Standard I/O or AS−i
2 System bus (CAN)
6 Other function module on FIF
e.g. application I/O, INTERBUS, ...
10 No valid recognition
C0395* LONGWORD
process input data Bit 0..15 Controller word (mapping to C0135) For bus operation only
·
Sending of control word and main
setpoint in a telegram to controller
·
In keypad: display only (hexadecimal)
Bit 16...31 Setpoint 1 (NSET1−N1) (mapping to C0046)
C0396* LONGWORD
process output data Bit 0...15 Controller status word 1
(mapping of C0150) For bus operation only
·
Reading of status word and output
frequency in a telegram from controller
·
In keypad: display only (hexadecimal)
Bit 16...31 Output frequency (MCTRL1−NOUT)
(mapping of C0050)
C0409
v
Configuration relay
output K2 Output of digital signals to relay K2
·
Relay output K2 only with 8200 vector
15 ... 90 kW
·
For operation with Application−I/O only
active as of version E82ZAFA...XXVx2x
^ 7−73
255 255 Not assigned (FIXED−FREE)
Digital signals possible for C0409 see C0415