Toshiba Magnia 3030 - Manual (Page 95)

Installing and Removing Hardware
Replacing the Internal Battery
77
Replace the battery in the procedure below referring to “Before starting opera-
tion” in Chapter 2.
1 Remove the server panels.
See “Removing and replacing the server panels” on page 24.
2 If an expansion card has been installed, remove it according to the proce-
dure.
3 Remove the battery cover, put your fingers below the battery, and pull it up.
Removing the battery
4 Install a new battery with polarity (+) up.
Installing the battery
5 If an expansion card has been removed, install it according to the procedure.
6 Install the server panels.
7 Set the server according to the system configuration information that was
written down in advance.