Toshiba Magnia 3030 - Manual (Page 42)

Getting Started
Removing the front doors 24
Removing the front doors
Follows these steps to remove the front doors.
1 Open both the upper and lower doors.
2 Lift up the lower door to unhook the hinges.
Removing the front doors
Removing and replacing the server panels
To mount some optional devices inside the server, you need to remove the side
panel if your server is a pedestal model or the top panel if your server is a rack
model.
WARNING: Before removing or replacing a server panel, always turn off the
DC operate switch on the back of the server and unplug the power cable.
Failure to do so might cause you to get an electric shock.
CAUTION: When sliding a server panel, be careful not to catch you finger
between it and the server. The panel might cause injury.
NOTE: The rack model’s top panel corresponds to a pedestal model’s side
panel.