Toshiba Magnia 3030 - Manual (Page 54)

Getting Started
Connecting the Power Cable 36
WARNING: When connecting optional units, be sure to use Toshiba’s genuine
parts or those recommended by Toshiba. If something other is connected to
the server, it may cause an outbreak of fire.
For details of optional parts, contact an authorized Magnia service provider.
NOTE: When connecting and disconnecting an interface cable, be sure to
hold the cable connector.
Some articles and interface cables of other brands cannot be connected to
this server as external units and connecting cables. Before purchasing a
peripheral unit, ask the manufacturer or sales office of the article about its
connectability to this server. When connecting peripheral units, refer to
instructions of respective units together with this manual.
Connecting the Power Cable
NOTE: Use of an uninterruptive power supply (UPS) is recommended to avoid
losing data because of unexpected shutdown or power failure.
After connection of peripheral devices is complete, connect the power cable to
this server following the procedure mentioned below.
1 For the EPS-R model, make sure that the DC operate switch on the back of
the server is set at the OFF position.
2 Connect the power cable to the connector on the back of the server.
3 Secure the power cable with the nylon clamp.