Toshiba Magnia 3030 - Manual (Page 57)

Getting Started
Switching On the Server
39
Switching On the Server
NOTE: When turning on the server again, turn on the power switch (and the
DC operate switch on the back of the server for the EPS-R model) at least 10
seconds after the power switch (and the DC operate switch) was last turned
off. If the server is switched on again within 10 seconds after it was switched
off last, it may cause malfunction of the server or trouble with it.
Turning on the server in the usual process
Turn on the server according to the following procedure.
1 Check to see if all of the peripheral devices such as a display, keyboard,
mouse, etc. are correctly connected with the server.
2 Check to see if the power cables of the external units are connected with AC
outlets with the earth line or an uninterruptive power supply (UPS).
3 Turn on the display.
4 Turn on the DC operate switch on the back of the server (for the EPS-R
model).
Make sure that the power indicator lamp (
) lights up amber.
Turn on the DC operate switch.
5 Press the power switch.
Make sure that the power indicator lamp ( ) lights up in green.