Changing the number of cpus – Toshiba Magnia 3030 User Manual

Page 168

System Configuration Setup
Sensor Data and LCD Setup Tool

150

The following sleep switch operation mode select screen will appear:

Enter “1” to make the sleep switch valid, or “2” to make the switch invalid.

If the entry is accepted properly, “Setting ... OK!” will be displayed.

2 When the message “HIT ANY KEY” is displayed, remove the floppy disk

from the floppy disk drive and then turn off the server.

Changing the number of CPUs

1 Select menu item 4, “Setup CPU FAN Sensor (for MAGNIA3030)”.

2 The mother board sensor information will be updated. Make sure that “Pro-

gramming Complete” is displayed to denote normal completion of process-
ing.

3 When the message “Press any key to continue ...” is displayed, remove the

floppy disk from the floppy disk drive.

4 Restart the system by pressing any key.

TOSHIBA Setup ACPI Program VerX.XX

ACPI = Disable

Change Status?

[1] Enable

[2] Disable

[ESC] Escape

Please Input ([1]-[2] or [ESC])>>

Setting...OK

HIT ANY KEY