Toshiba Magnia 3030 - Manual (Page 147)

System Configuration Setup
BIOS Setup Utility
129
BIOS Setup Utility
The BIOS Setup Utility is a menu type of utility program designed to verify and
modify the basic settings of the mother board.
Starting the Setup Utility
The BIOS screen will appear when the server is started.
To start the BIOS Setup Utility, press the F2 key immediately after the above
screen has appeared. When the key is pressed, the message “Press
to enter SETUP” will change to “Entering Setup ...” and then after the Power
On Self Test (POST) sequence, the BIOS Setup Utility will be started.
NOTE: If is not pressed, the operating system will be loaded after the
Power On Self Test (POST) sequence is completed.
Phoenix BIOS 4.0 Release 6.0
Copyright 1985-1999 Phoenix Technologies Ltd., All Rights Reserved
L440GX+0.86B.XXXX.XXX.XXXXXXXXXX
L440GX+ Production Release XX.X
BIOS Build XXX
Intel(R) Pentium (R) III Processor XXX MHz
XXXXXXXX Extended Memory ECC Initialized
XXXXXXXX Extended Memory Passed
0256K Cache SRAM Passed
System BIOS Shadowed
Video BIOS Shaowed
UMB upper limit segment address : XXXX
Keyboard Detected
Mouse initialized
Press to enter SETUP