Toshiba Magnia 3030 - Manual (Page 46)

Getting Started
Setting up server security 28
Setting up server security
If your server is a pedestal model, you can adjust its security in 3 levels (no
access, limited access and full access) because the upper and lower front doors
can be locked separately. Both the front doors can be removed completely by
unhooking their hinges.
No access
When both the doors are closed and locked, only the system administrator can
access the server function.
To limit users’ access to the internal devices of the server:
Close the upper and lower front doors, insert the key into the lower door lock
and turn it to the No Access position (top) (
).
NOTE: The key is needed to release the lock and open the front doors.
Limited access
When the upper door is opened, users can access the power switch, reset
switch, CD-ROM drive and floppy disk drive.
To permit access to the upper portion of the server:
Close the lower door, insert the key into the lower door lock and turn it to the
Limited Access position (horizontal) (
).
No access
Full access
Limited
access