Toshiba Magnia 3030 - Manual (Page 137)

System Configuration Setup
SSU (System Setup Utility)
119
Select “Enable” to use the selected device as it is with the currently valid
resource.
™ Disable
Select “Disable” to invalidate the selected device (there are some devices
that cannot be invalidated).
™ Free Resources-Re-assign at Next Boot
If this command is selected, the resource of the selected device is tempo-
rarily released from assignment and it is again assigned at the next startup of
the system.
Select this command to assign the resource that is currently used for the
selected device to another device giving the first priority to it, for example,
when it is needed to add data on the ISA expansion card.
“DMA”, “IRQ”, “Memory” and “Ports” show data on the resource currently
assigned to the selected device. For this server, only the setting value of “IRQ”
(interrupt) can be changed. Click the “IRQ” box and the following dialog box
appears. Change the IRQ value as desired.
If the interrupt destination (IRQ) has been used by the ISA expansion card, etc.,
a message to express that “the interrupt destination conflicts with another”
appears on the menu as shown below.