Toshiba Magnia 3030 - Manual (Page 239)

221
Unit Logs
Unit logs
Unit logs are listed on following pages. Use these logs to record system compo-
nent additions and information on removed optional items. The information
that has thus been recorded may need to be used when executing various
utilities.
The unit logs consist of a log concerning the basic system configuration, and a
log relating to added units (system components).
Use the basic system configuration log to record the model numbers and serial
numbers of the server and the mother board. The model number and serial
number of the server are labeled on its rear panel. The model number and serial
number of the mother board are inscribed near the expantion slot cover at the
left edge of the board.
Use the system component log to record the model numbers and serial numbers
of the system components, the dates of their removal or replacement, the names
of their manufacturers, and so on. Maintain a record of all added components
such as magnetic disk units and option cards.
The positions where the model numbers and serial numbers of the system com-
ponents are inscribed vary from manufacturer to manufacturer. Refer to the
relevant product manuals.